Railroad

Locomotive engineers are among the most experienced and skilled workers on the railroad. Locomotive engineers operate large trains carrying cargo and passengers between stations. Most engineers run diesel locomotives, while a few operate electrically powered locomotives.

Before and after each run, engineers check the mechanical condition of their locomotive and make minor adjustments on the spot. Engineers receive starting instructions from conductors and move controls such as throttles and airbrakes to drive the locomotive. They monitor gauges and meters that measure speed, amperage, battery charge, and air pressure, both in the brake lines and in the main reservoir.

On the open rail and in the yard, engineers confer with conductors and traffic control center personnel via two-way radio or mobile telephone to issue or receive information concerning stops, delays, and train locations. They interpret and comply with orders, signals, speed limits, and railroad rules and regulations. They must have a thorough knowledge of the signaling systems, yards, and terminals on routes over which they operate. Engineers must be constantly aware of the condition and makeup of their train, because trains react differently to acceleration, braking, and curves, depending on the grade and condition of the rail, the number of cars, the ratio of empty to loaded cars, and the amount of slack in the train.

Rail yard engineers, dinkey operators, and hostlers drive switching or small “dinkey” engines within railroad yards, industrial plants, mines and quarries, or construction projects.

Railroad conductors coordinate the activities of freight and passenger train crews. Railroad conductors assigned to freight trains review schedules, switching orders, waybills, and shipping records to obtain loading and unloading information regarding their cargo. Conductors assigned to passenger trains also ensure passenger safety and comfort as they go about collecting tickets and fares, making announcements for the benefit of passengers, and coordinating activities of the crew to provide passenger services.

Yardmasters coordinate activities of workers engaged in railroad traffic operations. These activities include making up or breaking up trains and switching inbound or outbound traffic to a specific section of the line. Some cars are sent to unload their cargo on special tracks, while other cars are moved to other tracks to await assemblage into new trains destined for different cities. Yardmasters inform engineers where to move the cars to fit the planned train configuration. Switches, many of them operated remotely by computer, divert the locomotive or cars to the proper track for coupling and uncoupling.

Railroad brake, signal, and switch operators perform a variety of activities, such as operating track switches to route cars to different sections of the yard. They may signal engineers and set warning signals, help to couple and uncouple rolling stock to make up or break up trains, or inspect couplings, airhoses, and handbrakes.

Traditionally, freight train crews included either one or two brake operators—one in the locomotive with the engineer and another who rode with the conductor in the rear car. Brake operators worked under the direction of conductors and did the physical work involved in adding and removing cars at railroad stations and assembling and disassembling trains in railroad yards. In an effort to reduce costs and take advantage of new technology, most railroads have phased out brake operators. Many modern freight trains use only an engineer and a conductor, stationed with the engineer, because new visual instrumentation and monitoring devices have eliminated the need for crewmembers located at the rear of the train.

In contrast to other rail transportation workers, subway and streetcar operators generally work for public transit authorities instead of railroads. Subway operators control trains that transport passengers throughout a city and its suburbs. The trains run in underground tunnels, on the surface, or on elevated tracks. Operators must stay alert to observe signals along the track that indicate when they must start, slow, or stop their train. They also make announcements to riders, may open and close the doors of the train, and ensure that passengers get on and off the subway safely.

Streetcar operators drive electric-powered streetcars, trolleys, or light-rail vehicles that are similar to streetcars that transport passengers in metropolitan areas. Some tracks may be recessed in city streets or have grade crossings, so operators must observe traffic signals and cope with car and truck traffic. Operators start, slow, and stop their cars so that passengers may get on and off with ease. Operators may collect fares and issue change and transfers. They also answer questions from passengers concerning fares, schedules, and routes.

Rail yard workers spend most of their time outdoors in varying weather. The work of conductors and engineers on local runs, on which trains frequently stop at stations to pick up and deliver cars, is physically demanding. Climbing up and down and getting off moving cars is strenuous and can be dangerous.

MIRG.org 1-888-802-6376 e-mail

www.MIRG.org • Site Map • About Us • Contact Us • Links • Disclaimer