Sheet Metal Worker

Sheet metal workers make, install, and maintain heating, ventilation, and air-conditioning duct systems; roofs; siding; rain gutters; downspouts; skylights; restaurant equipment; outdoor signs; railroad cars; tailgates; customized precision equipment; and many other products made from metal sheets. They also may work with fiberglass and plastic materials. Although some workers specialize in fabrication, installation, or maintenance, most do all three jobs. Sheet metal workers do both construction-related sheet metal work and mass production of sheet metal products in manufacturing.

Sheet metal workers first study plans and specifications to determine the kind and quantity of materials they will need. They then measure, cut, bend, shape, and fasten pieces of sheet metal to make ductwork, countertops, and other custom products. In an increasing number of shops, sheet metal workers use computerized metalworking equipment. This enables them to perform their tasks more quickly and to experiment with different layouts to find the one that results in the least waste of material. They cut, drill, and form parts with computer-controlled saws, lasers, shears, and presses.

In shops without computerized equipment, and for products that cannot be made on such equipment, sheet metal workers use hand calculators to make the required calculations and use tapes, rulers, and other measuring devices for layout work. They then cut or stamp the parts on machine tools.

Before assembling pieces, sheet metal workers check each part for accuracy using measuring instruments such as calipers and micrometers and, if necessary, finish it by using hand, rotary, or squaring shears and hacksaws. After the parts have been inspected, workers fasten seams and joints together with welds, bolts, cement, rivets, solder, specially formed sheet metal drive clips, or other connecting devices. They then take the parts to the construction site, where they further assemble the pieces as they install them. These workers install ducts, pipes, and tubes by joining them end to end and hanging them with metal hangers secured to a ceiling or a wall. They also use shears, hammers, punches, and drills to make parts at the worksite or to alter parts made in the shop.

Some jobs are done completely at the jobsite. When installing a metal roof, for example, sheet metal workers measure and cut the roofing panels that are needed to complete the job. They secure the first panel in place and interlock and fasten the grooved edge of the next panel into the grooved edge of the first. Then, they nail or weld the free edge of the panel to the structure. This two-step process is repeated for each additional panel. Finally, the workers fasten machine-made molding at joints, along corners, and around windows and doors for a neat, finished effect.

Sheet metal workers in manufacturing plants make sheet metal parts for products such as aircraft or industrial equipment. Although some of the fabrication techniques used in large-scale manufacturing are similar to those used in smaller shops, the work may be highly automated and repetitive. Sheet metal workers doing such work may be responsible for reprogramming the computer control systems of the equipment they operate.

Sheet metal workers usually work a 40-hour week. Those who fabricate sheet metal products work in shops that are well-lighted and well-ventilated. However, they stand for long periods and lift heavy materials and finished pieces. Sheet metal workers must follow safety practices because working around high-speed machines can be dangerous. They also are subject to cuts from sharp metal, burns from soldering and welding, and falls from ladders and scaffolds. They usually wear safety glasses but must not wear jewelry or loose-fitting clothing that could easily be caught in a machine. They may work at a variety of different production stations to reduce the repetitiveness of the work.

Those performing installation work do considerable bending, lifting, standing, climbing, and squatting, sometimes in close quarters or in awkward positions. Although duct systems and kitchen equipment are installed indoors, the installation of siding, roofs, and gutters involves much outdoor work, requiring sheet metal workers to be exposed to various kinds of weather.

MIRG.org 1-888-802-6376 e-mail

www.MIRG.org • Site Map • About Us • Contact Us • Links • Disclaimer