Brick Mason

Brickmasons, blockmasons, and stonemasons work in closely related trades creating attractive, durable surfaces and structures. The work varies in complexity, from laying a simple masonry walkway to installing an ornate exterior on a highrise building. Brickmasons and blockmasons—who often are called simply bricklayers—build and repair walls, floors, partitions, fireplaces, chimneys, and other structures with brick, precast masonry panels, concrete block, and other masonry materials. Some brickmasons specialize in installing firebrick linings in industrial furnaces. Stonemasons build stone walls, as well as set stone exteriors and floors. They work with two types of stone—natural cut stone, such as marble, granite, and limestone; and artificial stone made from concrete, marble chips, or other masonry materials. Stonemasons usually work on nonresidential structures, such as houses of worship, hotels, and office buildings.

When building a structure, brickmasons use 1 of 2 methods, the corner lead or the corner pole. Using the corner lead method, they begin by constructing a pyramid of bricks at each corner—called a lead. After the corner leads are complete, less experienced brickmasons fill in the wall between the corners, using a line from corner to corner to guide each course, or layer, of brick. Due to the precision needed, corner leads are time-consuming to erect and require the skills of experienced bricklayers.

Because of the expense associated with building corner leads, most brickmasons use corner poles, also called masonry guides, that enable them to build an entire wall at the same time. They fasten the corner poles (posts) in a plumb position to define the wall line and stretch a line between them. This line serves as a guide for each course of brick. Brickmasons then spread a bed of mortar (a cement, sand, and water mixture) with a trowel (a flat, bladed metal tool with a handle), place the brick on the mortar bed, and press and tap the brick into place. Depending on blueprint specifications, brickmasons either cut bricks with a hammer and chisel or saw them to fit around windows, doors, and other openings. Mortar joints are then finished with jointing tools for a sealed, neat, uniform appearance. Although brickmasons typically use steel supports, or lintels, at window and door openings, they sometimes build brick arches, which support and enhance the beauty of the brickwork.

Boilermakers often use potentially dangerous equipment, such as acetylene torches and power grinders, handle heavy parts, and work on ladders or on top of large vessels. Work is physically demanding and may be done in cramped quarters inside boilers, vats, or tanks that are often damp and poorly ventilated. In some instances, work may be done at high elevations for an extended period. To reduce the chance of injuries, boilermakers may wear hardhats, harnesses, protective clothing, safety glasses and shoes, and respirators. Boilermakers may experience extended periods of overtime when equipment is shut down for maintenance. Overtime work also may be necessary to meet construction or production deadlines.

Brickmasons, blockmasons, and stonemasons usually work outdoors and are exposed to the elements. They stand, kneel, and bend for long periods and often have to lift heavy materials. Common hazards include injuries from tools and falls from scaffolds, but these can often be avoided when proper safety equipment is used and safety practices are followed.

Source: http://stats.bls.gov/home.htm