Machinists

Machinists use machine tools, such as lathes, milling machines, and machining centers, to produce precision metal parts. Although they may produce large quantities of one part, precision machinists often produce small batches or one-of-a-kind items. They use their knowledge of the working properties of metals and their skill with machine tools to plan and carry out the operations needed to make machined products that meet precise specifications.

Before they machine a part, machinists must carefully plan and prepare the operation. These workers first review blueprints or written specifications for a job. Next, they calculate where to cut or bore into the workpiece (the piece of metal that is being shaped), how fast to feed the metal into the machine, and how much metal to remove. They then select tools and materials for the job, plan the sequence of cutting and finishing operations, and mark the metal stock to show where cuts should be made.

After this layout work is completed, machinists perform the necessary machining operations. They position the metal stock on the machine tool—drill press, lathe, milling machine, or other type of machine—set the controls, and make the cuts. During the machining process, they must constantly monitor the feed rate and speed of the machine. Machinists also ensure that the workpiece is being properly lubricated and cooled, because the machining of metal products generates a significant amount of heat. The temperature of the workpiece is a key concern because most metals expand when heated; machinists must adjust the size of their cuts relative to the temperature. Some rare but increasingly popular metals, such as titanium, are machined at extremely high temperatures.

Machinists detect some problems by listening for specific sounds—for example, a dull cutting tool or excessive vibration. Dull cutting tools are removed and replaced. Cutting speeds are adjusted to compensate for harmonic vibrations, which can decrease the accuracy of cuts, particularly on newer high-speed spindles and lathes. After the work is completed, machinists use both simple and highly sophisticated measuring tools to check the accuracy of their work against blueprints.

Today, most machine shops are relatively clean, well lit, and ventilated. Many computer-controlled machines are partially or totally enclosed, minimizing the exposure of workers to noise, debris, and the lubricants used to cool workpieces during machining. Nevertheless, working around machine tools presents certain dangers, and workers must follow safety precautions. Machinists wear protective equipment, such as safety glasses to shield against bits of flying metal and earplugs to dampen machinery noise. They also must exercise caution when handling hazardous coolants and lubricants, although many common water-based lubricants present little hazard. The job requires stamina, because machinists stand most of the day and, at times, may need to lift moderately heavy workpieces. Modern factories extensively employ autoloaders and overhead cranes, reducing heavy lifting.

Source: http://stats.bls.gov/home.htm